Whether it’s a Regency terrace on Brunswick Terrace or a post-war semi, our Brunswick slate roofing is built to last, quoted in writing, and cleared up properly when we leave.
Tell us the job in 30 seconds. No pushy sales, no call-out fee.
20+
Years Local
127
5★ Reviews
24/7
Emergency
10yr
Guarantee
For Brunswick slate roofs we offer single-slate replacement, torching and re-fixing, and full re-slating with matched natural slate. We work sympathetically on period and conservation-area properties. Free survey and a fixed written quote, no call-out fee.
✓ NFRC Registered
✓ Fully Insured
✓ 10 Year Guarantee
✓ Free Quotes
✓ No Hidden Costs
✓ Coastal Specialists
Customer Reviews
What Brunswick Homeowners Say
★★★★★
“A botched face-fixed repair from a previous roofer on our place off Brunswick Terrace. They did it properly with matched reclaimed slate. Straightforward and honest.”
Neil J. · Brunswick Terrace
★★★★★
“Called about a few slates off the front slope after a gale. Matched them to the originals and re-fixed the area. Good communication throughout.”
David R. · Waterloo Street
★★★★★
“Had a full re-slate on our period house at our Brunswick home. They sympathetic job, matched the slate beautifully — highly recommend.”
Gary N. · Waterloo Street
Honest advice
Is Slate Roofing the Right Fix?
In Brunswick, most slate roofing jobs announce themselves before you ever get on the roof. Slate roofs fail differently from tile — the signs are slipping, edge-fretting and nail failure rather than cracked tiles.
The signs worth acting on:
Slipped or missing slates, often after wind
Slates delaminating or flaking at the edges (fretting)
Rusty nail heads and slates sliding — nail or peg failure
Cracked or previously face-fixed slates (the wrong repair)
When it is not the answer: If only a handful of slates have slipped on an otherwise sound roof, single-slate replacement is right — a full re-slate would be premature — see our guide.
Nail sickness — corroded fixings let tiles slip across a whole slope, a common re-roof trigger.
Local Knowledge
Slate Roofing in Brunswick: Local Factors
Slate is the signature covering on Brunswick's period stock, and matching it properly is what separates a lasting repair from an eyesore. the grade-I Regency terraces of Brunswick Square and Terrace have parapet gutters, slate roofs and strict conservation controls on any work. We source Welsh and reclaimed slate to match gauge, colour and thickness, and detail valleys and verges in lead rather than mortar where the original did.
On Brunswick streets like Brunswick Square, Brunswick Terrace, Waterloo Street, matching the existing slate — gauge, colour and thickness — is non-negotiable, and where the property is listed or in a conservation area we work to what Brighton & Hove City Council expects.
Local conditions shape the work here: brunswick's seafront frontage takes the full coastal exposure, with salt air and gales attacking the concealed parapet leadwork. We factor that into every survey, so the quote reflects your actual roof in Brunswick rather than a generic price — and we always tell you honestly if the job is smaller than you feared.
How It Works
How We Handle Slate Roofing in Brunswick
Survey & match
We inspect at roof level, identify the slate type and gauge, and confirm matching material — Welsh, Cornish or reclaimed.
Careful strip or repair
Sound slates are salvaged and re-used; failed slates and corroded nails or torching are removed.
Re-slate & detail
New and reclaimed slates are laid to the correct gauge and head-lap, with lead valleys, soakers and verges.
Clean & guarantee
We clear all debris, walk you through the finished roof and issue the written 10-year guarantee.
Every Brunswick job runs the same way: a free survey first, then a fixed written quote with no call-out fee and nothing hidden. We turn up when we say we will, keep you posted as the work goes on, protect the areas around the work and clear the site before we leave. You deal with the roofer doing the job, not a call centre — and the price we quote is the price you pay unless we find something and agree it with you first.
In Depth
Slate Roofing in Brunswick: What's Involved
Natural slate is a fundamentally different roof to concrete tile. It is thinner, heavier per square metre once laid to the right head-lap, and fixed slate-by-slate with copper or aluminium nails rather than clipped in courses. That is why slate work is slower and more skilled — and why a badly matched or face-fixed repair stands out a mile on a Brunswick roof.
The commonest failure we find is not the slate itself but the fixings: the nails corrode (‘nail fatigue’) and slates begin to slip in ones and twos, then in runs. Where the roof is otherwise sound we can strip a slope, salvage the good slate, and re-lay it with new fixings and breathable felt — a far cheaper route than a full re-slate, and one we always check for first.
Detailing is where slate roofs are won or lost. Valleys, hips, abutments and verges should be dressed in lead, not smeared in mortar, and the slate cut and laid to shed water cleanly. We detail the traditional way, which is what keeps a Brunswick slate roof watertight for decades rather than years.
The cost-saving move on a slate roof is to act early. A handful of slipped slates left alone lets water into the battens and felt, turning a cheap re-fix into a slope strip — so on a Brunswick slate roof, sorting slips promptly is what keeps the bill small.
For a few hundred pounds, an inspection can save you thousands — whether that is spotting a re-roof a seller did not disclose, evidencing that your Brunswick roof is sound before you sell, or giving a landlord a paper trail that heads off a dispute later.
Catching failed pointing early is what keeps costs down. Left long enough, water gets past the mortar and into the stack, and a straightforward repoint becomes a rebuild — so on a Brunswick stack, dealing with sandy, receding joints promptly is the cheaper path.
The economics are simple: a twice-yearly clear costs little, while the damp that a blocked gutter drives into a Brunswick wall can mean re-plastering, redecoration and even masonry repair. Regular clearing is the cheapest insurance a roof has.
Acting on a leaking rooflight early saves money too — a small re-flash now is far cheaper than the ceiling, insulation and plaster damage that a slow rooflight leak causes over a winter in a Brunswick loft.
Timescales
Typical Timescales in Brunswick
Every Brunswick roof is different, but these are the durations we quote most often:
Job
Typical duration
Single-slate replacement
1–2 hours
Re-fix a slipped area
Half a day
Lead valley in a slate roof
1–2 days
Re-slate one slope
3–5 days
Full re-slate (terraced)
5–8 days
For Brunswick jobs, slate work pauses in high wind and driving rain for safe handling, and each day's opening is made watertight before we leave.
Access
Getting Safely onto Brunswick Roofs
On Brunswick roofs, slate roofs are usually steeper and need a tower for repairs and full scaffold with edge protection for re-slating. Scaffold is specified for re-slating, valley rebuilds and any work beyond a small repair — always itemised in your written quote, never a hidden extra, and we arrange it.
In Brunswick, the grade-I Regency terraces of Brunswick Square and Terrace have parapet gutters, slate roofs and strict conservation controls on any work. Pavement scaffold and skip permits go through Brighton & Hove City Council; allow a few working days on streets like Brunswick Square, Brunswick Terrace, Waterloo Street where space is tight.
Pricing
Brunswick Slate Roofing: Cost Guide
What you can expect to pay in Brunswick, before your fixed written quote:
Job
Typical range
Notes
Single-slate replacement
£150–£250
Per visit, incl. access
Re-fix a slipped area
£250–£500
Per elevation
Lead valley (slate)
£550–£950
Incl. new lead
Re-slate one slope
£2,500–£5,000
Matched natural slate
Full re-slate (terraced)
£6,000–£12,000+
Size & slate dependent
What moves the price in Brunswick
Slate type — new Welsh, Cornish or reclaimed to match
Roof pitch, height and scaffold needed
How many slates can be salvaged and re-used
Lead detailing at valleys, hips and abutments
Worked example: A lead valley rebuild in a slate roof on a Regency terrace on Brunswick Terrace typically runs around £800, including access and waste.
In Brunswick, no deposit on repairs under £500; staged payments on re-slating, materials on site first.
Guarantee
The Guarantee in Plain Terms
On Brunswick roofs, our workmanship is backed by a written 10-year guarantee, with manufacturer warranties on materials on top — in writing, every time.
Covered: our workmanship for 10 years, in writing, and transferable if you sell.
On top: manufacturer warranties on materials (terms vary by product).
Not covered: storm or impact damage — that is an insurance matter, which we document for your claim.
If a fault appears in covered work, we come back and put it right — no quibbling, no re-charge.
Good to know
Living Around the Work in Brunswick
Scaffold, a skip and several days of activity on a re-slate; individual slate repairs are quick and quiet. You do not need to stay home for external work — we just need power and access agreed in advance.
We re-slate through most of the year but plan strips around dry, calm windows — slate is heavy and needs safe handling. Locally, Brunswick's seafront frontage takes the full coastal exposure, with salt air and gales attacking the concealed parapet leadwork.
FAQ
Frequently Asked Questions
Yes. We identify the slate type, gauge and thickness and source matching Welsh, Cornish or reclaimed slate. On Brunswick's period and conservation stock, matching the original is essential — we never face-fix or mix mismatched slate.
Often just repairs. If most slates are sound and only a few have slipped or the nails have gone locally, we re-fix rather than re-slate. We only recommend a full re-slate when nail fatigue or fretting is widespread — and we tell you honestly after the survey.
Natural slate costs more than concrete tile in both material and labour, because it is heavier, needs steeper detailing and more skilled fixing. But a properly laid slate roof lasts far longer, which is why it is the right choice on Brunswick's heritage properties.
Yes. Much of Brunswick's slate stock sits in conservation areas or is listed. We use traditional materials and detailing to meet those requirements and can advise on what Brighton & Hove City Council will expect.
A well-laid natural slate roof can last 80–100 years or more — far longer than concrete tile. Usually it is the nails and lead detailing that fail first, not the slate, which is why re-fixing and re-leading a sound slate roof is so often the right call in Brunswick.
Very often, yes. If the slates are sound and it is the fixings that have failed, we salvage and re-lay the good slate with new nails and felt, topping up with matched reclaimed slate only where needed. It keeps the roof authentic and the cost down.
Yes — a Brunswick inspection covers the whole roof, including flat roofs over extensions, garages and dormers, which is often where problems hide. We report on the covering, the upstands and the drainage, and rate each finding by urgency like the rest of the roof.
Yes. We clear around solar panels carefully and reach gutters above conservatories and extensions using the right access, so nothing is skipped or damaged. We will confirm how we will access those runs before we start.
We focus on the rooflight and its weatherproofing, and we can fit manufacturer flashing kits that suit later blind or accessory fitting. If you are planning solar or blinds, tell us at survey and we will allow for it in the install.
